#ifndef CUSTOM_BOARD_H
#define CUSTOM_BOARD_H

#define NRF52840_BREAKOUT_BOARD 1
#define ADS1298 1

// Testing with nRF52840:
#if NRF52840_BREAKOUT_BOARD
  #define ADS1298_DRDY_PIN 11
  #define ADS1298_MISO_PIN 12
  #define ADS1298_SCK_PIN  13
  #define ADS1298_CS_PIN   14
  // I don't think you're supposed to tie PWDN and reset together on ADS1298
  #define ADS1298_PWDN_PIN 15
  #define ADS1298_MOSI_PIN 16

  // This is the packet format for data received over USB:
  // [CN:4bit][TN:4bit][..data]
  
  // COMMAND NIBBLES (4-bit definitions), CN_
  #define CN_WRITE_IC_REGS  0x8  // 0b1000
  #define CN_READ_IC_REGS   0x4  // 0b0100
  #define CN_STREAM_CONTROL 0xB  // 0b1011
  #define CN_MISC_CONTROLS  0xE  // 0b1110
  
  // CTRL_REQUEST_BATTERY_LEVEL :: 0xBB
  
  // TARGET NIBBLES (4-bit definitions)
  #define TN_IC_ADS1298       0x1
  #define TN_IC_EXT           0xF // Extended .. check the next byte!
  
  #define TN_STREAM_START     0x2
  #define TN_STREAM_STOP      0xF
  #define TN_STREAM_REQUEST_BATTERY_LEVEL 0xB
  #define TN_STREAM_REQUEST_INFO 0xE
  
  #define TN_MISC_THROUGHPUT_TEST  0xF
  #define TN_MISC_RTT_REQUEST      0x1
  
  // #################### RESPONSE CODES ####################
  
  #define CTRL_STAT_INFO_PERIPHERALS    0x03
  #define CTRL_STAT_INFO_HW_FW_VERSION  0x04
  #define CTRL_STAT_INFO_WHO_AM_I       0x05
  
  #define REGISTER_READBACK_PREFIX      0xC8
  #define ID_REGISTER_READBACK_PREFIX   0xC9
  #define REGISTER_READBACK_ADS1298     TN_IC_ADS1298
  
  #define FIRST_NIBBLE(x)  ((x >> 4) & 0xF)
  #define SECOND_NIBBLE(x) (x & 0xF)
  // For IC controls, we want to prefix the registers with the length: [u16???]
  // Data format will be different for each device.
  // For ADS1298
    // [CN:4bit][TN:4bit][length:u8][..data]
  // For other device with 1 register read/write at a time
    // [CN:4bit][TN:4bit][RegisterID][RegisterData] for single register
  
#endif // NRF52840_BREAKOUT_BOARD

enum recording_mode_t {
    RECORDING_MODE_DISABLED = 0,
    RECORDING_MODE_ALL      = 1
};


#endif // CUSTOM_BOARD_H